Swit PB-S98S

SKU
PB-S98S
PB-S series camera batteries are compact designed, shorter than normal V-mount batteries, and match perfectly with most of the Cine-cameras.
Disponible sur commande (3-30j.+)
310,80 €

Square shape design for Cine-cameras

PB-S series camera batteries are compact designed, shorter than normal V-mount batteries, and match perfectly with most of the Cine-cameras.

98Wh / 6.8Ah Capacity

Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.6Ah high capacity.
Can run approx 3 hours for normal cameras.

2× D-tap, 1× USB

PB-S98S provides 2x D-tap output sockets with 8A/100W load, and 1x USB 5V/2A socket, to power other on-camera devices together.

Digital Power Info

LCD display accurate remaining run time

The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

Digital Power Info

LCD display accurate remaining run time

The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

    • Display power percentage when the battery is free or during charging
    • Display remaining running time when the battery is powering on camera or any devices. Press power check button can switch to power percentage display.
    • When remaining running time is less than 15min, the LCD wil flash to remind changing battery.
    • Long press power check button for 5 seconds, it wil display battery cycle times.
    • Display warning info when the battery detected over discharging, over charging current/voltage, over load, short circuit, etc. Refer the warning code to user manual to take steps.

LCD warning codes description

P01 - P13 : The battery trigger protection function and it can be recovered;
E01 - E03 : Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.
When the battery rests over 10 days or runs out of power, it will enter sleep mode and the LCD will not display.

Common battery protection codes :

P01 : Run out of power, please charge the battery asap.
P02 : Over-voltage when charging, please remove the battery, discharge the battery to decrease voltage to recover.
P03 : Over-current when charging, please remove the battery, and it will recover after 30 seconds.
P05-07 : The load is too heavy, please remove the battery, and it will recover after 30 seconds.
P08-09 : Battery short circuit, please remover the battery and make sure electrodes are clean, and it will recover after 30 seconds.
P10-13 : Temperature protection, please remove the battery and place at room temperature to recover.

Rédigez votre propre commentaire
Vous commentez :Swit PB-S98S
Votre évaluation
Customer Questions
No Questions
Did you find what you were looking for?